Close the top cover and press it down to latch it closed. Gently wipe the LED array surface with the LED lens cleaner that came with the new toner cartridge or soft tissue.Ħ.
#Okidata c5800 drums install#
Follow the installation instructions on or inside the box containing the new toner cartridge to install the new toner cartridge.ĥ. Adauga la Favorite Cere informatii TRANSPORT GRATUIT. Cod Produs: EP-744 Ai nevoie de ajutor 0743577692. Replaced the magenta drum with a new Oki drum - same message, printer wont print, cant get to any other menus. Got the same message and the printer will not print.
Follow the installation instructions on or inside the box containing the new image drum to install the new image drum.Ĥ. Oki C5800 M DRUM UNIT Oki 282,70 RON In stoc Durata de livrare: 24 - 48 ore Transport gratuit. Replaced the toner cartridge with a new Oki cartridge. Remove the used image drum and toner cartridge.ģ. Warning! If the printer has been powered on, the fuser may be hot. Press the cover release and open the printer’s top cover fully. Switch off the printer and allow the fuser to cool for about 10 minutes before opening the top cover.ġ. Always hold the image drum unit by the ends or from the top. Never expose the drum to direct sunlight or very bright room lighting. If the drum unit needs to be out of the printer for longer than this, please wrap the cartridge inside a black plastic bag to keep it away from light. Do not touch it and do not expose it to normal room light for more than 5 minutes. It is recommended that you change the toner cartridge and clean the LED array at the same time as you change the image drum.Ĭaution! The green image drum surface at the base of the cartridge is very delicate and light sensitive. Change the image drum when the print becomes faint or begins to deteriorate. When the drum reaches 90% of its life, a CHANGE DRUM message is displayed in the operator panel LCD. Also, the Error LED indicator slowly blinks when the image drum requires changing. When the drum reaches 90% of its life, a CHANGE DRUM message is displayed in the printer Status Monitor.
0 kommentar(er)
